CH series impact crusher is manufactured on the basis of advanced foreign technology and domestic applications. With the advantages of more human-oriented, simple design, reasonable structure, better cavity and large capacity, CH series impact crusher can crush all kinds of ores in primary and secondary crushing process.

1. Heavy type rotor with optimized design, reasonable structure and enhancing rotational inertia can take finite element endurance analysis. It can achieve higher crushing ratio, better crushing and abrasion resistance performance.
2. Standard scaleboard can increases interchangeability, which will decrease spare part repertory and variety, and make replacement much easier.
3. Unique hydraulic device design is convenient for operators to open the chassis, replace accessories, and adjust the discharge gate.
4. The simple structure of impact frame and grinding frame has the advantages of easy operation, convenient maintenance and low cost.

Model	Max Feed edge(mm)	Capacity(t/h)	Motor power(kW)	Weight（Excluding Motor）(t)
				with grinding cavity	without grinding cavity
CHP4939(A)	500	90-160	110-132	14.696	13.596
CHP4955(A)	500	100-260	132-200	17.43	16.12
CHP5159(A)	600	180-300	200-250	21.2	22.12
CHP5559(A)	650	220-450	250-315	27.046	25.438
CHP5979(A)	700	250-550	400-440	36.45	34.3
CHP6379(A)	800	300-600	440-560	55.5	42.3
CHP7179(A)	1000	500-850	630	84.1	78.9
CHP7998(A)	1200	800-1200	1250	111.5	101.2

Model	Max Feed edge(mm)	Capacity(t/h)	Motor power(kW)	Weight（Excluding Motor）(t)
				with grinding cavity	without grinding cavity
CHS4528(A)	250	40-70	37-55	11.8	10.98
CHS4539(A)	300	70-100	55-75	14.4	13.47
CHS4939(A)	350	100-180	110-132	14.696	13.596
CHS4955(A)	350	150-290	132-200	17.43	16.12
CHS5159(A)	400	180-350	200-250	21.05	22.04
CHS5559(A)	450	250-450	250-315	27.046	25.438
CHS5979(A)	500	280-550	400-440	36.7	34.6
CHS6379(A)	600	300-600	440-560	56.4	43.5
CHS7179(A)	700	500-850	630	84.1	78.9
CHS7998(A)	1000	700-1100	1250	115.6	109.5

Note:
The capacity is total tons per hour passing through crusher at open circuit when crushing medium and low hardness materials with the bulk density of 1.6x10³kg/m³. Capacity is relative to physical character, feeding type, feeding size, composition, etc.